Evervue BN185 Instructions d'exploitation télécharger pdf (Page 16)

TROUBLESHOOTING

Symptons Check Item

“Ghost” or double image

This may be caused by obstruction to the antenna due to high rise

•

buildings or hills. Using a higly directional antenna may improve the

picture.

No Power

Check the AC power cord is plugged ino the mains socket.

•

Unplug the power cord, wait for 60 seconds. Then re-insert plug into •

the mains socket and turn on the unit again.

No Picture

Check antenna connections at the rear of the unit to see if it is

•

properly connected to the unit.

Possible broadcast station trouble. Try another channel.•

Adjust the contrast and brightness settings.•

Check the closed captions control. Some TEXT modes could block •

the screen.

Select a correct input•

Is a non-compatible signal being input?•

Good picture but no sound

Increase the VOLUME.•

Check that the unit is not muted. •

Good sound but poor color Adjust the contrast, color and brightness settings.•

Poor Picture

Sometimes, poor picture quality occurs when having activated an •

SVHS camera or camcorder connected and having connected

another peripheral at the same time. In this case, switch off one of

the other peirpheral.

Check whether the room is to bright.•

Horizontal Dotted Line

This may be caused by electrical interference (e.g. Hairdryer, nearby •

neon lights, etc.)

Turn off the equipment.•

Television not responding to remote

control

Check whether the batteries are working. Replace if necessary.•

Clean the remote control sensor lens on the unit.•

Do not use the remote control under strong or uorescent lighting.•

The batteries should be inserted with polarity(+,-) aligned.•

Snowy picture and noise Check the antenna connection.•

No stable or not synchronized D-Sub

picture

Check if you have selected the correct D-Sub mode in your PC•

No output from one of the speakers Adjust Balance in the SOUND menu•

Control buttons do not work

Unplug the power cord, wait for some seconds. Then re-plug the •

power cord and turn on the unit again.

Before calling for repair service, check the following items for possible remedies to the encountered symptoms.

Do not use in hot or cold rooms (locations)•

When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly •

delayed. This is not a malfunctio, and the unit will recover when the temperature returns to normal.

Do not leave the unit in a location exposed to direct sunlight •

Storage temperature: 0•

C to 50

C. Working temperature: 5

C to 40

NOTE: If your problem is not solved, turn your unit off and then on again once.

Never attempt to repair a defective unit yourself.

1 2 ... 11 12 13 14 15 16 17 18

Commentaires sur ces manuels

Pas de commentaire

Evervue BN185 Instructions d'exploitation Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Téléviseurs et moniteurs Evervue BN185